DRI2032TEN

Superior DRI2000 32" Direct Vent Gas Fireplace Insert (DRI2032)

★★★★★ (0)

Size: 32"

27"32"

----

You can save additional 3% OFF on top of all other discounts by paying via wire transfer or Zelle. Details at the checkout.
----

Required for installation

Trim & Surround — choose one

By placing an order at HearthDepot (https://hearthdepot.com/) you declare that you have read and accept this Shipping & Delivery Policy.

Order Confirmation

As soon as you place your order, you will receive a confirmation email. After that, we will process your order within 1–2 business days, during which time we will verify that all items ordered are in stock and available for immediate shipment. If your order is available for delivery within the advertised time frame, we will submit it to the warehouse for shipment. If the expected delivery time exceeds the advertised time frame, we will reach out to you via email and/or phone to confirm the order.

Shipping Costs

  • Free standard shipping on orders over $200 (contiguous US).
  • Orders of $199.99 or less: a flat $49 shipping & handling fee (contiguous US).
  • Alaska, Hawaii & Puerto Rico: a flat $500 non-contiguous delivery fee per order, with delivery typically taking 5–20 business days. Contact us before ordering if you would like to confirm the delivery time for your specific address.

Estimated Time of Shipping

Our standard shipping-out time for in-stock orders is 4–12 business days, and most orders ship within approximately 3–6 business days of placing the order. Made-to-order and built-to-order products (including many Empire Comfort Systems fireplaces manufactured to your configuration) typically ship within 4–12 weeks; the estimated lead time is indicated on the product page. If the expected shipping date for your order would fall outside the advertised time frame, our customer service team will reach out to confirm that the date works for you.

Order Shipment

Within 1–2 business days from the time your item has shipped, you will receive an email confirmation with tracking information. If you have not received tracking information within 6 business days of your order, follow up with us at support@hearthdepot.com.

For LTL freight shipments, Free Shipping means Standard Curbside Delivery. Liftgate service is included on most freight shipments of large fireplaces and heaters.

Curbside delivery is defined as delivery of the freight as close to the actual delivery address as possible. Please remember that the size of the tractor trailer and certain safety precautions may prevent the freight carrier from delivering the freight at the actual curb or delivery address. For addresses located on a cul-de-sac, dead-end street, or dirt road, curbside delivery is not guaranteed; the customer may need to meet the driver at the nearest intersection or paved street that the delivery truck can access.

In special cases, when the customer's address is in a high-cost delivery area (e.g., remote areas or the center of a large city), an additional delivery fee may be required. To confirm the availability of the Free Shipping – Standard Curbside Delivery option for your address, please contact the HearthDepot team before placing your order.

If your order has been shipped within our standard time frame (or by a deadline agreed with you) and delivery is delayed due to the customer's fault, and the carrier requests storage fees for holding the shipment, or a redelivery attempt fee after a failed delivery attempt caused by the customer, HearthDepot may require the customer to cover these storage/redelivery fees for delivery to continue.

Customer Responsibility for Shipping Address Accuracy

It is the customer's responsibility to ensure that the shipping address entered at checkout is complete and accurate. We fulfill orders strictly based on the information provided during the purchase process.

Liability Waiver: We are not responsible for orders that are lost, delayed, or delivered to an incorrect destination due to an error in the shipping address provided by the customer, and we are not liable to provide refunds or complimentary replacements for items successfully delivered to an incorrect address originally provided by the customer at checkout.

Address Corrections: Address modifications can only be requested before the order has been processed or shipped. Once a tracking number is generated or the package is in transit, changes may not be possible, and carrier address-change fees may apply.

Returned Packages: If a package is returned to our warehouse due to an incorrect or incomplete address, the customer will be responsible for the cost of re-shipping the order to the corrected address.

Areas Covered

All estimated delivery dates and shipping costs advertised on the website apply to the contiguous (lower 48) United States. We also ship to Alaska, Hawaii, and Puerto Rico for the flat non-contiguous delivery fee shown at checkout (see Shipping Costs above); delivery to these areas typically takes 5–20 business days. We do not ship directly to Canada, but we can ship your order to a US freight forwarder of your choice.

Damages (items shipped via LTL freight)

It is very important that you inspect the packaging of your items when they arrive and check that you received all boxes listed on the delivery receipt.

If you notice any damage or a shortage of packages, you must note it on the bill of lading, take pictures, and refuse delivery of the damaged pieces. Your note should say "refused due to damage." You must also take photos of all sides of the box and send them to us within 24 hours. If no damage is visible before opening the box, note "subject to further inspection, may contain concealed damage" on the delivery receipt — do not sign "free and clear."

Before unpacking the item, take photos of the packaging from all sides even if there are no visible signs of damage — this is essential if concealed damage is discovered and a claim must be filed with the carrier or manufacturer. If you notice concealed damage after delivery, do not discard the packaging, and contact us with photos within 24 hours of delivery.

If you notice minor/cosmetic damage (e.g., a small scratch or dent) and would like to accept the item in this condition "as is," add a detailed description of the damage on the bill of lading before signing, and send us photos within 24 hours. We can then usually offer free touch-up options (where available) and/or a partial refund for the inconvenience; the granting and amount of a partial refund are not guaranteed, and an item accepted "as is" cannot subsequently be returned as damaged.

Important: accepting a visibly damaged shipment without any notation on the bill of lading severely limits our ability to file a carrier claim and may make a replacement or refund impossible. Always note damage before signing.

After we receive your report of refused delivery or concealed damage, we immediately initiate a claim with the shipping company or the manufacturer. Once the claim is processed, replacements ship at no cost to you.

Do not install the unit or connect it to gas or power until you have fully inspected it and confirmed it is free of damage. Once an appliance has been installed or operated, it can no longer be returned, and transit-damage claims become significantly harder to process.

Damages (items shipped as a parcel via FedEx / UPS / USPS)

Check the packaging upon receipt. If you notice any damage, photograph all sides of the box and send the photos to us within 24 hours. Before unpacking, photograph the packaging from all sides even if there is no visible damage. If the product inside is damaged, do not discard the original packaging — it will be needed for the claim procedure and any replacement shipment.

Returns

Looking to return an item? See our Returns & Refunds policy (linked in the footer) for the 45-day return window, conditions, and the RMA process.

Questions

Email: support@hearthdepot.com
Phone: +1 (888) 398-1887 (Monday–Saturday, 8:00 AM – 8:00 PM EST)
Mail: BE-COMMERCE LLC, 30 N Gould St Ste 24751, Sheridan, WY 82801, USA

At Hearth Depot, we’re committed to giving you the best deal online — guaranteed. If you find a lower price on an identical item, we’ll not only match it, but we’ll also beat it by 10% of the difference.

How It Works

1️⃣ Found a Lower Price?
If you discover a better price on the same item from another retailer (including shipping), just let us know.

2️⃣ We’ll Match or Beat It!
We’ll verify the competitor’s price and adjust your total to match it and reduce it by an additional 10% of the difference.

3️⃣ Applies Even After Purchase
Already purchased? No worries! If you find a lower price within 30 days of your purchase, we’ll refund the difference, including the 10% reduction.

Example Calculation

Let’s say:

  • The item price at Hearth Depot: $1,000
  • The item price on a competitor’s site: $950

Difference: $1,000 - $950 = $50
Your Savings: $50 x 10% = $5
Your New Total: $950 - $5 = $945

Limitations of the 110% Best Price Guarantee

Our guarantee ensures fairness and applies under the following conditions:

  • Promotions such as rebates, buy one get one free, or other special offers are not eligible.
  • The item must be identical — same brand, model number, size, finish, and configuration — new, and covered by the full manufacturer’s warranty.
  • The item must be in stock on the competitor’s website.
  • The competitor must be an online retailer (physical retail locations are excluded).
  • We do not match prices from online marketplaces, discounters or auction websites (e.g. Amazon, eBay, Overstock, etc.).
  • The competitor must be an Authorized Dealer of the product and must adhere to manufacturer pricing agreements, including minimum advertised price (MAP) policies.
  • The guarantee includes the item price and shipping costs, but excludes sales tax.
  • Certain brands may be excluded from the guarantee. Please contact us for details.

How to Claim

1️⃣ Contact us at support@hearthdepot.com or call +1 (888) 398-1887.
2️⃣ Provide the competitor’s link and details of the lower price.
3️⃣ We’ll verify and adjust your price or issue a refund for the difference.

Why Choose Hearth Depot?

110% Best Price Guarantee – Always get the best deal.
Hassle-Free Shopping – Secure your order with confidence.
30-Day Price Protection – Covered even after you buy.
Top Customer Service – We’re here to help Monday–Saturday, 8:00 AM – 8:00 PM EST.

The Superior DRI2032 is a 32" direct-vent gas fireplace insert (Innovative Hearth Products). It is rated 28,000–16,000 BTU/hr on natural gas and 25,000–14,000 BTU/hr on propane, with a 15-7/8" installed depth.

Need a different size? This series is also available in 27" — use the size selector above to compare all sizes.

Key Features

  • Sealed direct-vent combustion: Co-linear direct vent: 3" UL 1777 listed gas-vent flex liner for exhaust and 3" UL 181 / UL 1777 liner for intake, through the existing chimney; vertical height minimum 10 ft, measured from the unit base to the end of the liner.
  • Heat input: 28,000–16,000 BTU/hr (NG) / 25,000–14,000 BTU/hr (LP); P4 thermal efficiency 57% NG / 61% LP.
  • Ignition: Electronic ignition with IPI/CPI (intermittent / continuous pilot) mode switch; 4×AA battery backup keeps the burner operating in a power outage (blower excluded).
  • Fire presentation: Ceramic fiber log set with glowing embers (included); firebox liner panels standard.
  • Blower: 140-CFM variable-speed blower standard (factory installed).
  • Required to complete: full Front Facade kit and co-linear 3" flex liner venting kit (sold separately, choose from the options on this page) — see Installation & Planning.
  • Installation: 15-7/8" depth, non-combustible hearth extension (min. 1/2" thick, k-factor 0.84): 10" in front of the appliance when its base is at floor level; 0" when the base is raised 4" above the room floor.
  • Safety listed: Tested and certified to ANSI Z21.88 / CSA 2.33 (vented gas fireplace heater), CSA/CGA 2.17 and UL 307B (gas appliances for manufactured/mobile homes), USA and Canada (report 16-204).

Specifications

Product Specifications

Model DRI2032TEN
Catalog Numbers F3026
Product Type Direct-vent gas fireplace insert (vented gas fireplace heater) for existing masonry or factory-built wood-burning fireplaces
Fuel Type Natural Gas as shipped (TEN); convertible to propane only with the IHP conversion kit
Installation Type Insert for masonry (UBC 37 / ULC S628) or factory-built solid-fuel fireplaces (UL 127 / ULC S610); approved for bedrooms and sitting rooms; may be installed in an aftermarket manufactured (mobile) home where not prohibited
Nominal Size 32"
Venting Type Co-linear direct vent: 3" UL 1777 listed gas-vent flex liner for exhaust and 3" UL 181 / UL 1777 liner for intake, through the existing chimney; vertical height minimum 10 ft, measured from the unit base to the end of the liner
Ignition Electronic ignition with IPI/CPI (intermittent / continuous pilot) mode switch; 4×AA battery backup keeps the burner operating in a power outage (blower excluded)
Electrical 120 VAC, 60 Hz, less than 2 A; three-prong grounded plug; 120 V required for the blower and recommended for the burner system
Controls Burner and blower controls on the unit; optional Ecoflow basic remote (On/Off, IPI/CPI) or wireless wall switch (On/Off, Hi/Lo) sold separately
BTU Input, Natural Gas (high–low) 28,000–16,000 BTU/hr
BTU Input, Propane (high–low) 25,000–14,000 BTU/hr
Thermal Efficiency (P4 / EnerGuide) 57% NG / 61% LP
AFUE 70% NG / 67% LP
Overall Width 31-5/8"
Overall Height 19-3/8"
Overall Depth 15-7/8"
Log Set Ceramic fiber log set with glowing embers (included)
Interior Firebox liner panels standard
Blower 140-CFM variable-speed blower standard (factory installed)
Certification Tested and certified to ANSI Z21.88 / CSA 2.33 (vented gas fireplace heater), CSA/CGA 2.17 and UL 307B (gas appliances for manufactured/mobile homes), USA and Canada
Listing Report No. 16-204

Shipping Information

Shipping Weight 104 lb
Shipping Dimensions (L × W × H) 38.25" × 19.25" × 36.25"
Shipping Volume 15.446 cu ft

Shipping figures describe the packed carton, not the installed fireplace.

What's Included

  • Insert body with factory-installed 140-CFM variable-speed blower
  • Power cord
  • Ceramic fiber log set and bag of glowing embers
  • Literature package: installation & operation manual, warning labels and hardware kit (leveling bolts, facade screws, washers and nuts)

Installation & Planning

Framing & Installation Dimensions

Hearth Extension Non-combustible hearth extension (min. 1/2" thick, k-factor 0.84): 10" in front of the appliance when its base is at floor level; 0" when the base is raised 4" above the room floor

Clearances to Combustibles

Combustible Side Wall 4" minimum
Combustible Mantel 32" minimum above the appliance for a mantel up to 10" deep

Required Components & Compatibility

  • Full Front Facade kit (required, choose one; sold separately): 3-sided medium or large, or 4-sided trimmable 46" × 38" — hangs on the insert's side mounting brackets and carries the control assembly
  • Co-linear 3" flex liner venting kit (required, sold separately): 3" UL 1777 exhaust liner and 3" UL 181/UL 1777 intake liner with adaptor, flashing and termination cap (e.g. Simpson Dura-Vent 46DVA-CL33 or Selkirk 4DT kits)
  • 120 VAC grounded receptacle at the fireplace for the blower (burner runs on battery backup without power)
  • Optional: Ecoflow basic remote control (On/Off, IPI/CPI) or wireless wall switch (On/Off, Hi/Lo); IHP LP conversion kit

The Superior DRI2032 is a 32" direct-vent gas fireplace insert (Innovative Hearth Products). It is rated 28,000–16,000 BTU/hr on natural gas and 25,000–14,000 BTU/hr on propane, with a 15-7/8" installed depth.

Need a different size? This series is also available in 27" — use the size selector above to compare all sizes.

Key Features

  • Sealed direct-vent combustion: Co-linear direct vent: 3" UL 1777 listed gas-vent flex liner for exhaust and 3" UL 181 / UL 1777 liner for intake, through the existing chimney; vertical height minimum 10 ft, measured from the unit base to the end of the liner.
  • Heat input: 28,000–16,000 BTU/hr (NG) / 25,000–14,000 BTU/hr (LP); P4 thermal efficiency 57% NG / 61% LP.
  • Ignition: Electronic ignition with IPI/CPI (intermittent / continuous pilot) mode switch; 4×AA battery backup keeps the burner operating in a power outage (blower excluded).
  • Fire presentation: Ceramic fiber log set with glowing embers (included); firebox liner panels standard.
  • Blower: 140-CFM variable-speed blower standard (factory installed).
  • Required to complete: full Front Facade kit and co-linear 3" flex liner venting kit (sold separately, choose from the options on this page) — see Installation & Planning.
  • Installation: 15-7/8" depth, non-combustible hearth extension (min. 1/2" thick, k-factor 0.84): 10" in front of the appliance when its base is at floor level; 0" when the base is raised 4" above the room floor.
  • Safety listed: Tested and certified to ANSI Z21.88 / CSA 2.33 (vented gas fireplace heater), CSA/CGA 2.17 and UL 307B (gas appliances for manufactured/mobile homes), USA and Canada (report 16-204).

Specifications

Product Specifications

Model DRI2032TEN
Catalog Numbers F3026
Product Type Direct-vent gas fireplace insert (vented gas fireplace heater) for existing masonry or factory-built wood-burning fireplaces
Fuel Type Natural Gas as shipped (TEN); convertible to propane only with the IHP conversion kit
Installation Type Insert for masonry (UBC 37 / ULC S628) or factory-built solid-fuel fireplaces (UL 127 / ULC S610); approved for bedrooms and sitting rooms; may be installed in an aftermarket manufactured (mobile) home where not prohibited
Nominal Size 32"
Venting Type Co-linear direct vent: 3" UL 1777 listed gas-vent flex liner for exhaust and 3" UL 181 / UL 1777 liner for intake, through the existing chimney; vertical height minimum 10 ft, measured from the unit base to the end of the liner
Ignition Electronic ignition with IPI/CPI (intermittent / continuous pilot) mode switch; 4×AA battery backup keeps the burner operating in a power outage (blower excluded)
Electrical 120 VAC, 60 Hz, less than 2 A; three-prong grounded plug; 120 V required for the blower and recommended for the burner system
Controls Burner and blower controls on the unit; optional Ecoflow basic remote (On/Off, IPI/CPI) or wireless wall switch (On/Off, Hi/Lo) sold separately
BTU Input, Natural Gas (high–low) 28,000–16,000 BTU/hr
BTU Input, Propane (high–low) 25,000–14,000 BTU/hr
Thermal Efficiency (P4 / EnerGuide) 57% NG / 61% LP
AFUE 70% NG / 67% LP
Overall Width 31-5/8"
Overall Height 19-3/8"
Overall Depth 15-7/8"
Log Set Ceramic fiber log set with glowing embers (included)
Interior Firebox liner panels standard
Blower 140-CFM variable-speed blower standard (factory installed)
Certification Tested and certified to ANSI Z21.88 / CSA 2.33 (vented gas fireplace heater), CSA/CGA 2.17 and UL 307B (gas appliances for manufactured/mobile homes), USA and Canada
Listing Report No. 16-204

Shipping Information

Shipping Weight 104 lb
Shipping Dimensions (L × W × H) 38.25" × 19.25" × 36.25"
Shipping Volume 15.446 cu ft

Shipping figures describe the packed carton, not the installed fireplace.

What's Included

  • Insert body with factory-installed 140-CFM variable-speed blower
  • Power cord
  • Ceramic fiber log set and bag of glowing embers
  • Literature package: installation & operation manual, warning labels and hardware kit (leveling bolts, facade screws, washers and nuts)

Installation & Planning

Framing & Installation Dimensions

Hearth Extension Non-combustible hearth extension (min. 1/2" thick, k-factor 0.84): 10" in front of the appliance when its base is at floor level; 0" when the base is raised 4" above the room floor

Clearances to Combustibles

Combustible Side Wall 4" minimum
Combustible Mantel 32" minimum above the appliance for a mantel up to 10" deep

Required Components & Compatibility

  • Full Front Facade kit (required, choose one; sold separately): 3-sided medium or large, or 4-sided trimmable 46" × 38" — hangs on the insert's side mounting brackets and carries the control assembly
  • Co-linear 3" flex liner venting kit (required, sold separately): 3" UL 1777 exhaust liner and 3" UL 181/UL 1777 intake liner with adaptor, flashing and termination cap (e.g. Simpson Dura-Vent 46DVA-CL33 or Selkirk 4DT kits)
  • 120 VAC grounded receptacle at the fireplace for the blower (burner runs on battery backup without power)
  • Optional: Ecoflow basic remote control (On/Off, IPI/CPI) or wireless wall switch (On/Off, Hi/Lo); IHP LP conversion kit

Get in touch with us

Get in touch with us

Text or Call : 888-398-1887or simply start a live chat with our experts.

Average response time is 39 seconds. We are ready to help: Monday - Saturday; 8:00 AM - 8:00 PM EST

support@hearthdepot.com

Text or Call : 888-398-1887or simply start a live chat with our experts.

Average response time is 39 seconds. We are ready to help: Monday - Saturday; 8:00 AM - 8:00 PM EST

support@hearthdepot.com

Top Reasons to buy from us:

Top Reasons to buy from us:

Free Shipping

On orders over $200

Best Warranty Available

Lowest Price Online

We will beat competitors' price!

Safe & Secure Ordering

★★★★★
★★★★★
★★★★★
★★★★★

Search